5.3 Other Fatal Alarms
Code |
Warning Message |
Solution |
505 |
Internal error |
Program error; please check G codes in the program. |
532 |
Please do homing first |
Return to home as instructed. |
533 |
Tool signal detected in none tool area |
When G37 touch the probe for the first time and Z axis has been pulled up, check if probe signal is continue working and if there are probe error. |
534 |
Cannot detect tool signal |
While executing G37, within set traves probe signal not detected. |
538 |
Please first do Z axis homing |
Get axis to home |
539 |
Please first do Y axis homing |
Same as 538. |
540 |
Please first do X axis homing |
Same as 538. |
561 |
When G94 mode execute tapping, corresponding current spindle speed, feed speed too small |
Changing rigid tapping program or machine parameter rigid tapping related setting. |
562 |
None rotary axis |
Change CNC program or within machine parameter choose rotary axis. |
563 |
PLC motion axis clash |
Change PLC axis motion definition. |
564 |
This program can only via program editor execute |
Only use program editor to execute the program. |
565 |
Rotary axis is locked |
Please first dissolve rotary axis' lock. |
572 |
G31 surpass limit |
According to G31 menu order. |
575 |
EtherCAT packet lost |
Check EtherCAT cable. |
600 |
PLC warning |
PLC send out, detail please see error message dialog box. |
574 |
System abnormal warning |
System error, please provide CNC program to INTEK Technology for reference, to find the error and conduct change. |
Out of memory, Divide by zero error, Exception error |
Same as 574. |