3.1.6 mode1
This part is listing mode1 signal and its description.
Signal |
Function |
Explain |
sts.mode1.mG00 |
NC in G00 or G01 or G02 or G03 or G33 or G31 |
00: G00 01: G01 02: G02 03: G03 04: G33 05: G31 |
sts.mode1.mG51 |
NC in G50 or G51 |
0: G50, 1: G51 |
sts.mode1.mG68 |
NC in G69 or G68 |
0: G69, 1: G68 |
sts.mode1.mM29 |
NC in rigid tapping |
1: Y, 0: N |
sts.mode1.mG7101 |
NC in G71.00 or G71.01 (Direction track) |
0: G71.00 1: G71.01 |
sts.mode1.mMFAvailable |
Manual not allows |
1: Y, 0: N |
sts.mode1.mM00 |
NC in M00 program hold |
1: Y, 0: N |
sts.mode1.mG37 |
NC in G37 |
1: Y, 0: N |
sts.mode1.mPlcSubOn |
NC in PLC sub program |
1: Y, 0: N |
sts.mode1.mEEPROM |
No function |
|
sts.mode1.mXSVON |
X-axis servo on |
1: Y, 0: N |
sts.mode1.mYSVON |
Y-axis servo on |
1: Y, 0: N |
sts.mode1.mZSVON |
Z-axis servo on |
1: Y, 0: N |
sts.mode1.mASVON |
A-axis servo on |
1: Y, 0: N |