4.3.1 G code table Symbol Description


The following lists the symbols and descriptions associated with the G-Code:


Symbol

Explain

*

The specified G code for this group when power on.

#

You can set the G code power-on preset value of this group by parameters.

^

The most recently used G code for this group is still retained at shutdown and is used as the G code setting for the next power-on.

&

The value set in this G code is reserved until the program is finished or before it is reset, and needs to be set again after each power-on.

%

This command is valid until the corresponding cancel command is set or another command is set.