6.1.6 Macro Smooth Mode

G10.60: Turn on macro smooth mode.

G11.60: close macro smooth mode (Default state).

The default state of the controller is G11.60. If the processing mode is incorrect when the status is G10.60, the status will return to G11.60.

In G10.60 mode, the fourth line of the status window will be displayed when the program is executed:

L：000 D：000 H：000 G10.60

Note:

In the G10.60 mode, M97 and M99 will not be sent to the PLC to maintain program execution smoothness.