1 System Architecture
INCON-M84/M86/M86R CNC controller is a high-end CNC controller that uses the newest generation of semi-conductor technology. Base on its function, INCON-M84/M86/M86R can again be split into three models, including M84, M86 and M86R.
INCON-M84/M86/M86R |
M84 |
M86 |
M86R |
Max number of servo axis |
4 |
6 |
6 |
Simultaneously axis |
4 |
6 |
6 (5-axis RTCP/TWP) |
PLC axis |
8 |
8 |
8 |
Spindle axis |
1 |
2 |
2 |
Max digital inputs / outputs |
256/256 |
256/256 |
256/256 |
INCON-M84/M86/M86R Controller Models
The configuration of the external servo drive and spindle drive of the INCON-M84/M86/M86R controller is as follows:
INCON-M84/M86/M86R |
M84 |
M86/M86R |
Main control unit ECU |
1 |
1 |
I/O unit + embedded I/O communication unit ENU (standard Equips EQU×2, 32 I/P, 32 O/P) |
16 |
16 |
First operation panel (10/15 inches screen, S system is not included) (elective) |
1 |
1 |
ESU spindle not EtherCAT (elective) |
1 |
1 |
INCON-M84/M86/M86R CNC Controller Composition
Note: |
If the spindle driver of M84/M86/M86R, is not like EtherCAT, then ESU selection is required. |