7.2 Start-Up file (SYS

7.2 Start-Up file (SYS_INIT.CNC)

Machine pre-set file of INCON-M84/M86/M86R will open automatically and start executing, after power on. This function can provide special request for the machine manufacturer. Machine manufacturer can first set system detail and then place file name as SYS_INIT.CNC.

After machine manufacturer enter level 3, they can use SYS_INIT.CNC file. Afterwards every time the CNC controller open, if they read the file within saved info, it will work automatically, when executing the program, the detail will not be shown on CNC controller.

Note:

This program need to be save within CNC controller's and can only use SYS_INIT.CNC as file name.