3.1.8 Other State

Signal	Function	Explain
sts.toolNo	Current tool No. in use	Unsigned short integer data
sts.postedPgmPtr	Current program line point	Long integer data
sts.directQOccupied	Current block number in Queue	Short integer data
sts.speedRemainder	Speed remainder, unit of metric: 0.001 mm/min, unit of inch 0.0001 inch/mm	Unsigned short integer data
sts.feedOverride	Current G01 feed override	Unsigned short integer data
sts.G0Override	Current G00 override	Unsigned short integer data
sts.jogOverride	Current JOG override	Unsigned short integer data
sts.spindleSpeed	Current spindle speed	Long integer data
sts.incStep	Current INC step	Unsigned short integer data
sts.sysTimeTick	Current system time tick	Long integer data
sts.curSpeed	Current program speed (Controller parameter shows the real speed function is selected, it is the actual feedrate, otherwise the command speed)	Long integer data
sts.realVSpeed	Real command speed	Long integer data
sts.temperature	The controller temperature	Integer data, unit is °C
sts.SerialNo	Controller serial No.	Integer data
sts.curLenCompValue	Current tool length compensation	Long integer data
sts.optionFacility	Optional code	Unsigned short integer data
sts.LineId	Current block line No. (N code)	Long integer data
sts.programName	Program name of current executing program	Char string data
sts.subprogramName	Program name of current executing subprogram	Char string data
sts.realSpSpeed	Show real spindle speed	Long integer data
sts.realSubSpSpeed	Show real sub spindle speed	Long integer data