4.13.17 G10.66/G11.66: Tiny Line Segments Connecting Function On/Off
If the program is a combination of very small line segments to approach a curve, G10.66/G11.66 can be used to enable/disable the minimum line segment connection function.
If the single block speed is 6000 mm/min and the single block length is less than 100 μm, the speed can be maintained at 6000 mm/min after the connection function of the minimum line segment of G10.66 is started. If it is not started (G11.66), the speed is Will be lower than 6000 mm/min.
The default state of the CNC controller when it is powered on is G11.66, which is not activated.
The user can start the minimal segment connection function with G10.66 at the beginning of the program.