8.4 General Alarms

Code	Warning Message	Solution
001	Command error	Command error, please see instruction.
002	M95 call sub program loop surpass 8	Sub program is calling sub program, allow no more then 8 level.
003	M97 call sub program loop surpass 8	Same as 002.
004	M98 call sub program loop surpass 8	Same as 002.
005	M95 format error	Program error.
006	M97 command require sub program	M97 lacks sub program number.
007	M98 command need vice program file name	M98 lacks sub program name.
008	This is not a sub program, can't execute M99	Lack main program to execute sub program, please write main program.
009	This place cannot change coordinate plan	Tool compensation cannot change coordinate plan.
010	Homing not done	Please return to home first.
011	Can't do compensation here	MDI does not allow tool compensation command.
012	Has not yet execute G28 or G30, cannot execute G29	G29 must have G28 or G30 setting middle point.
013	Tool compensation must be working	Reference tool compensation explaining.
014	Tool compensation has been working	Tool compensation cannot repeat to G41/G42 command.
015	Because G68 is working, can't execute G51	G68 not cancel can't have G51.
016	Because G68 not yet cancel, can't execute G50	When G51 have G68, must first cancel G69 can G50 be use to cancel G51.
017	Error G52 command, must have at least one X, Y, Z or A	G code error.
018	Only G01 can execute the angle chamfering or corner rounding	Can only allow G01 to do angel chamfering or corner rounding.
019	Error mirror axis	Mirror functional is working plan related, must first choice correct plan.
020	Must set working plan	Same as 019.
021	Other tool radius compensation is at work	Cannot repeat G41/G42 within tool radius compensation.
022	Tool length compensation has been working	Tool length compensation cannot repeat G43.
023	Train in tool radius compensation must be G00 or G01	Only allow G00/G01 to train in or train out tool compensation mode
024	Train out tool radius compensation order must be G00 or G01	Same as 023.
025	Because tool radius compensation does not function G40 can't be done	According to tool radius compensation related instruction.
026	Because tool length compensation does not function G49 can't be done	According to tool length compensation related instruction.
027	Within tool radius compensation or while angle chamfering or corner rounding, third axis motion is not allowed	Angle chamfering, corner rounding or tool radius compensation, not allow third or fourth axis to move.
028	Within tool radius compensation or while angle chamfering or corner rounding, forth axis motion is not allowed	Same as 027.
029	Within tool radius compensation, behind G02/G03 it cannot follow the command of the full circle	Tool radius compensation, after arc cutting not allowing single command for full circle cutting.
030	Within tool radius compensation, full circle command cannot be follow by interpolate command	Tool radius compensation, if a single order for full circle cutting command, afterwards must finish tool radius compensation, cannot continue interpolate command.
031	Wrong MDI command	Correct MDI command.
032	Wrong H code	H value range 1~128.
033	Wrong T code	T value surpass tool umber limit.
034	Wrong M code	M value range 0~99.
035	Wrong G code	G code error.
036	Because of compensation function is at work, this place cannot change D value	G41/G42 does not allow change tool radius compensation value.
037	Wrong DNC command	While executing DNC program, cannot call sub program. So, don't accept M95/M97/M98/M99.
038	Can cycle must have reference point	Within can cycle, R reference value is missing.
039	Because can cycle not yet completed, cannot cancel	Press F10 to finish execution and automatically cancel can cycle.
040	Because compensation is at work the place cannot has MDI	Within tool radius compensation, if MDI pause, not allowing axis movement command.
041	Within G94 mode can't execute G33	G94 does not allow G33 execution.
042	Lack dug depth	Within cycle forgot to give Z value depth.
043	G87 order must have reference positioning	G87 order, forgot to give R position value.
044	G87 order must be at G98 mode to execute	G87 order cannot execute within G99 mode.
045	Tool radius compensation can't execute can cycle	Tool radius compensation does not accept can cycle.
046	Because the execution can cycle or pocket cycle, MDI cannot execute the command	Can cycle or pocket cycle, does not allow MDI command.
047	Scale mirror at work	G51 not cancel, can't give G51.
048	Rotation at work	G68 not cancel can't give G68.
049	Memory not enough	Similar to exception error problem, please provide CNC program to Intek Technology for reference, to find the error.
050	G53 must work under G90 mode	G53 can only operate under G90.
051	Within the "run—from start", G37 can't be executed	When the system is executing, the program run from start cannot allow G37 tool length command.
052	Before executing G37 must assign tool number	Before G37 tool length testing, first select the tool from H value.
053	Circle pocket cycle requires radius setting	Circle pocket cycle, missing radius value.
054	Rectangular pocket cycle requires length and wide setting	Rectangular pocket cycle, missing length and width high (u, v, w) value.
055	Pocket cycle requires setting of each cut with Q distance	Pocket cycle requires Q value.
056	Pocket cycle requires centre setting	Pocket cycle missing centre (x, y, z) value.
057	Pocket cycle requires moving direction setting	Need G02/G03 to know direction to dig.
058	Run from start mode, cannot execute G88	G88 need manual cooperation.
059	Pocket cycle depth smaller then accuracy depth, please check depth number direction and sign	Check if the program is normal.
060	Pocket cycle total size smaller then precision cut thickness	Check if the program is normal.
061	When machine lock or spindle lock, cannot execute G37	Can't detect tool when Machine lock or spindle lock.
062	Tool radius compensation or tool length compensation, cannot execute G92	Reference G92 note.
063	Rigid tapping require S code	Rigid tapping must instruct S code.
064	Rigid tapping S value too big	S value must be reasonable size.
065	Max rigid tapping spindle speed is 0, so, executing tapping cannot	S value must be reasonable size.
066	Wrong D code	D value must be between 1~128.
067	Pocket cycle requires spindle cutting speed	G70/G71 order must give I value.
068	While executing pocket cycle, tool radius cannot be 0	Tool compensation table's tool radius value must be set.
069	Corner rounding's radius too big	Corner rounding radius must be reasonable.
070	Dowel radius and external radius too small	Dowel's concave must be larger than tool radius.
071	Must set external length	Reference dowel cycle.
072	Must set external wide	Reference dowel cycle.
073	External too small	Reference dowel cycle.
074	Must set inside or outside side milling	Reference dowel cycle.
075	Hole drilling info not enough	Reference drilling menu.
076	Final stop value smaller then initiating spot	Reference drilling menu.
077	Must set starting angel	Reference drilling menu.
078	Command value too big	Value must be smaller than 9 digits.
079	Fine cutting width too big	Fine value must be reasonable size.
080	Hole drilling mode value must be larger than 0	Drilling value can't be 0.
081	The next two block's tool compensation will over cut the piece	Tool radius compensation can't be done, line smaller then tool radius.
082	The tool radius compensation, missing next section command	Reference tool radius note item.
083	Command certain number sign must be positive	Check the order.
084	Wrong can cycle command	Check the cycle order.
085	Program wrongs plan of corresponding spindle's parallel axis	Check pocket cycle and dowel cycle.
086	G76 and G87 need to provide axis offset of spindle stop	Reference G76 or G87 explain.
087	The sharp is not closing path	Reference G70.1x instruction.
091	Wrong sharp command	Reference G70.1x instruction.
095	When set direction tracking is at work, there can't be a fourth axis action	Reference G71.0x instruction.
096	If desire to use direction tracking, fourth axis must function	Reference G71.0x instruction.
097	Wrong object instruction	Reference G70.2x instruction.
098	Object module number must larger than 0	Reference G70.2x instruction.
099	Arc object module must set circle centre	Reference G70.2x instruction.
101	When system is executing, pause not done by M00/M01, but MDI can only have M, S, T code	According to panel instructs MDI explanation.
102	Sub program must stop according to M99	According to fixed sub program.
103	Hard disk error	Check hard drive.
104	Wrong info in setting instruction	Correct info order.
105	Information setting mode initiated	Initiate info setting mode.
106	Within PLC sub program, there cannot be M95/M97/M98 order	Reference menu program, sub program's calling or return explain.
107	This is not a PLC sub program!	Same as 106.
108	Calling PLC sub program un finish work incorrect	Same as 106.
109	PLC setting tool length surpass limit	Reference menu's tool compensation related explain.
110	Current system status, can't continue executing	Shift correct system status.
111	Can't sift to lock axis included work space	Unlock axis or modify program.
112	G11 under system status, can execute transfer	Shift correct system status.
113	G15 under system status, can execute transfer	Same as 112.
114	G40 under system status, can execute transfer	Same as 112.
115	G49 under system status, can execute transfer	Same as 112.
116	G50 under system status, can execute transfer	Same as 112.
117	G69 under system status, can execute transfer	Same as 112.
118	G80 under system status, can execute transfer	Same as 112.
119	HSHP parameters exceed the limit	Please refer to descriptions of HSHP.
120	Error macro command line	Reference macro explain menu.
121	Macro command loop surpass 8	Same as 120.
122	Can't have PLC sub program	Reference program, sub program, calling or return explain menu.
123	Macro command surpass limitation	Reference macro command menu related explain.
124	Start working number surpass limit	Reference menu starting from related order.
125	Must be under G90 mode to execute	Shift system status to G90.
126	G93 mode must have F code	Reference menu G93 explain.
127	Leaving G93 mode must have F code	Same as 126.
128	Within G93, this order can't be executed	Same as 126.
129	Cannot execute G93	Same as 126.
131	G65 loop surpass 4 times	Reference menu G65 instruction.
132	Cannot be system sub program	Reference menu program, sub program's calling or return related explain.
133	Within G66 function	Reference menu G66 explain.
134	Cannot be system sub program	Reference menu, sub program menu's calling or return explain.
135	Cannot execute M98	Same as 134.
499	programdon't exist	Check the program code and file.