8.3 Other Fatal Alarms

Code	Warning Message	Solution
505	Internal error	Program error; please check G codes in the program.
532	Please do homing first	Return to home as instructed.
533	Tool signal detected in none tool area	When G37 touch the probe for the first time and Z axis has been pulled up, check if probe signal is continue working and if there are probe error.
534	Cannot detect tool signal	Same as 533.
538	Please first do Z axis homing	Get axis to home.
539	Please first do Y axis homing	Same as 538.
540	Please first do X axis homing	Same as 538.
561	When G94 mode execute tapping, corresponding current spindle speed, feed speed too small	Changing rigid tapping program or machine parameter rigid tapping related setting.
562	None rotary axis	Change CNC program or within machine parameter choose rotary axis.
563	PLC motion axis clash	Change PLC axis motion definition.
564	This program can only via program editor execute	Only use program editor to execute the program.
565	Rotary axis is locked	Please first dissolve rotary axis' lock.
572	G31 surpass limit	According to G31 menu order.
575	EtherCAT packet lost	Check EtherCAT cable.
600	PLC warning	PLC send out, detail please see error message dialog box.
574	System abnormal warning	System error, please provide CNC program to INTEK Technology for reference, to find the error and conduct change.
	Out of memory, Divide by zero error, Exception error	Same as 574.