3.12.2.2 HSHP Scheme (Optional)

Power-on default program setting for high-speed and high-precision is 0th group, ICON-M84/M86/M86R controller got high-speed high-precision features as its option, the option provides high speed high precision option for detail work. Control case number are binary code, each binary code represents a control case option. The function of each option is as below:

1.	Do not check the end of speed: If activate this function, the speed at the end of the block while conducting the high speed high precision function, the CNC controller won't check the encoder's speed to determine whether the block is completed. If initiate this function the speed of completing work piece would increase, but would decrease in precision to detail.
2.	New geometric evaluation: INCON-M84/M86/M86R pre read the CNC controller's program block, check the geometric relationship between each single block, to determine the motion speed and acceleration control. If activated this function, initiate the new geometric evaluation method.
4.	Connection of smaller section blocks: If activate this function, INCON-M84/M86/M86R will continue to connect smaller section blocks while execute to make the control motion smoother.
8.	Not checking the geometric relation of the program: If activated this function, with exception of the largest G60 turning angle, the CNC controller won't check the program's geometric to determine future speed, so the action would be fast. User must be aware of possible machine shaking.

The column value setting is hex, for example to choose 1 and 4, the setting value is 5. To initiate option 1, 4, 8 setting value is 0D.

Note: for HSHP Scheme, please contact INTEK.