4.6.2.2 G37 Can Designate Non Spindle Parallel Axis to Do Automatic Tool Length Measurement
The G37 command can specify the non-spindle parallel axis to perform the automatic tool length measurement function format such as: G37 X_Q_D_F_E_ or G37 Y_Q_D_F_E_. The relevant steps and settings of the automatic tool length measurement are as described above.
example:
G37 X10 Q_ D_ F_ E_
In this line of instructions, the X-axis will perform the automatic tool length measurement action, and after the measurement is completed, the X-axis compensation value will be filled in the tool compensation table. (even if the spindle is set to the Z axis)