3.3.4 Max Feed Speed (Unit: mm/min)
When conducting cutting, can use "Max Feed Speed" (pre set value is 3000, unit: mm/min). If the value gain via F value or override surpass such value, then the actual speed will be limited be this value.
When the calculated fasted feed speed surpasses the CNC controller parameter setting limit (0~65535), you must use the following formula:
Fastest feed speed setting = calculated max feed speed/100 + 60000
For example: calculated the max feed speed to be 120000 mm/min
The axis parameter fastest feed speed setting is 120000/100 + 60000 = 61200