3.8.1.1 Beware of Rotary Axis Pitch Error Compensation
When setting the pitch error compensation value of rotary axis, you must be aware the compensation value of point 0 and point 36 are the same. For example: a circle of rotary axis is 360000, length as 10000, zero is 0. If the compensation of value of point 0 is 0, then the compensation of point 36 is also 0.
If one way pitch error compensation, the 0 point compensation is usually 0 and the 36 point compensation must also be 0.
If double way pitch error compensation, the negative pitch error compensation value usually is not 0 at point 0, be aware, during this time, the compensation value of point 36 setting must be same as point 0.